For the past couple of weeks, I have been explaining the best way to repair a damaged window pane in your house. But, what should you have dual pane windows? Will be the process the identical? Well, quite considerably, except for a couple of variations. So, let’s examine the single pane repair procedure, and I will level out the differences relating to dual pane windows.
When we start discussing dual pane windows, among the first things that comes to mind is vinyl window frames rather than aluminum. When dealing with dual pane windows, it is possible to have possibly aluminum or vinyl frames, depending on the yr the home was built. Dual pane glass got popular within the 1980′s, but vinyl frames didn’t genuinely catch on until the 1990′s. So, if your house is much less than 10 years previous, probabilities are you have vinyl framed windows. In both situation, I will talk about the differences. Let’s say you have a sliding aluminum frame window with dual pane glass. The process for removing the frame from the opening along with the glass in the sash will be the very same as using the single pane windows.
The differences are, very first, the glass goes in to the frame about twice as far as the single pane window. The single pane window glass went 1/4″ in to the surrounding rubber. The dual pane typically goes 1/2″ to the rubber. So, if each pieces of glass are damaged, you are heading to must purchase a brand new IGU (Insulated Glass Unit) from your neighborhood glass shop. They are heading to want to know the width, height, overall thickness, and quite possibly the person glass thickness. The most beneficial method to get the dimensions would be to measure the width and height from rubber to rubber, write individuals numbers down. Then, eliminate the panel from the opening and place it on a table like we did with the single pane window. Get rid of the screws from opposite corners and pull of the frame. You are going to be capable of see how far the glass goes into the surrounding rubber. If it is 1/2″, then you need to add 1″ towards the width and height that you simply measured previously (1/2″ occasions two sides= 1″). Then, measure the total thickness of your unit by removing the rubber in the glass edge.
Read More…
No Comments